Benx Fire Barrier Fixing

For fixing insulation up to 250mm thick into concrete, brick and block. Stainless steel compression anchors. Product is supplied in one piece and is used for securing MW fire barriers both horizontally and vertically. This product should be specified where the substrate is dense.

Used for fixing Rockwool Lamella fire barriers in EPS and Phenolic systems where required. Fixing frequency is 2 per 1m length of Lamella. This fixing is secured by shank compression and relies on being forced into a hole smaller than its diameter.

  • 90 – 300mm

  • 250

Technical Information

  • Anchor Body Material

    Stainless steel

  • Pin Material

    N/A

  • Hammer or Screw Set

    Hammer

  • Minimum Embedment Depth

    50 mm

  • Drill Hole Diameter

    8mm

  • Point Thermal Transmittance

    0.002 W/K

  • Lengths

    90 – 300mm

  • Quantity per box

    250

Related Products

Expanded polystyrene EPS insulation board upgrades the thermal properties of a building, improving U-values, reducing the risk of water penetration and...
Phenolic insulation is versatile and can be used in many building applications, typically continuously laminated phenolic board is used in roofing, cavity...
Contact Us

Contact Us