For securing lightweight to medium weight fittings (up to 11kg). These fixings can be used as a retrofit solution after the render is complete. Using an 8mm drill bit simply drill through the render system and into the substrate, insert the Dart Anchor and tighten up.
The head of the Dart Anchor comes with two fins opposite each other, it is important that the fins are inserted into the render system to help with the loads, i.e. for signage the fins run at 3 and 9 o’clock and for down pipes the fins run at 12 and 6 o’clock.
Once inserted, using a number 8 external grade screw the external fixture can be fitted into the head of the Dart Anchor.
