BS EN 13501-1 Class A1 Non-Combustible
Consult RCM technical services of specific fire resistance to BS EN 1364-1 or BS EN 1365-1
Thanks to its ability to protect the building envelope against incidental moisture damage during and after construction, DensGlass Sheathing is a preferred substrate under a wide variety of facades, such as:
1200 x 2400 x 12.7mm (Longer lengths available to order, subject to minimum quantity)
Sheathing board to
This is a scribe and snap board. It may be cut using the score and snap method, no power tools are required. It can be drilled and nailed using conventional hand tools, offering many of the properties of timber. Screws to be installed flush to the board surface.
For Technical Service or Product Support please file a technical request using our support form or contact your local representative.
Technical Request FormCan’t find the solution you’re looking for? We can help. Our team of experts are on hand to answer your questions.
Contact Us750 kg/m3
0.21 W/mK
To EN 15283-1
BS EN 13501-1 Class A1 Non Combustible
Level 10 ASTM D3273
Fleeced - Matt
Equal to that of the building installed to
1200 x 2400 mm
9.5
NPD
BS EN 13501-1 Class A1 Non-Combustible
Consult RCM technical services of specific fire resistance to BS EN 1364-1 or BS EN 1365-1
EN 15283
RCM FIX018 - 4.2 x 32 Tek screw
RCM FIX005 - 4.2 x 42 Tek screw
RCM Densglass can be used as an external sheathing board on structures where a fire rating is required including those greater than 18m in height.
DensGlass should be fitted with the label to the outside.
DensGlass has a classification of A1 to EN13501-1. This is a reaction to fire classification and should not be confused with fire resistance.
No, DensGlass is not meant to be used as a permanently exposed external board. However, during construction it can be left exposed for up to twelve months with all joints treated with either RCM Tape or FR PRO Sealant. However, if the joints are taped as soon as the boards are fitted they can be left exposed during the construction phase for up to 3 months, for up to 12 months temporary exposure we highly recommend using the RCM Joint Seal Kit.
No, DensGlass is not meant to be used as a tile backer board.
No, DensGlass is not meant to be used as a render carrier board.
Construction utility knife suitable for cutting gypsum based boards.
