Envirobase Basecoat

Envirobase Basecoat is a pre-mixed ready to use material with the addition of clean water being the only requirement.

A cement based ultra- high performance base coat designed to meet the ETAG 004 requirements as an EWI base coat, using blended high performance polymer technology for excellent adhesion strength and hydrophobic properties, chemical additives also control rehydration and workability.

  • 25kg

  • For base coat with embedment with reinforcing mesh on EWI system and render carrier boards - 3,9 – 5,5 kg / m2

    Note: These estimates take no account of wastage and may vary according to the type of surface involved.
    An allowance must be made for uneven and misaligned substrates when ordering materials.

Key Features

  • Highly Flexible
  • Excellent Adhesion
  • Polymer Modified
  • Factory Produced / Quality Controlled
  • Vapour Permeable
  • Eco Friendly

Substrates

  • Insulation (Mineral Wool, Phenolic, EPS, ICF)
  • Render Carrier Board
  • Brick or Block Work

Technical Information

Related Products

  • Retrobase basecoat is a polymer modified reinforcing and levelling basecoat coat used in combination with reinforcement mesh. Vapour permeable, weather...
  • Envirorend basecoat is a reinforcing and levelling basecoat coat used in combination with reinforcement mesh. Applied directly onto the face of the insulation...
  • Supplied in 50m² rolls (50m long by 1m wide) Benx glass fibre reinforcement mesh is used to add extra strength and impact resistance to basecoats, both...

Contact Us