Lipped Hammer Fixing

Lipped hammer fixings have a wider flange than normal hammer fixings making them ideal for securing base tracks, stop profiles and TS Rail supports into concrete / masonry substrates.

  • 6 15/45 for items up to 15mm thick
    6 35/65 for items up to 35mm thick

  • 100

Mechanical Fixing of Insulation to Various Substrates

Mechanical fixings or anchors play an important function in the way in which External Wall Insulation Systems perform under building and dynamic loadings. The role of the fixing is far greater than simply holding the insulation in place until the render is applied, it has to accommodate movement within the structure, positive and negative wind pressure and supporting the self-weight of the system to name a few key functions.

There are a number of different fixings that can be used and it is important to select the fixing for the application and in some instances this requires on site pull out tests to be completed to determine the performance of the fixing with the substrate.

Based on site conditions and location along with site based test results, a specific fixing pattern may be required. Please contact the Benx technical team for advice.

All masonry based EWI fixings are tested and Certified in accordance with ETAG 014 ‘Plastic Anchors for ETICS’. Within this standard there are 5 categories for which the fixings can be Certified as being acceptable to be used in and these can be seen in the table below. If a substrate is not categorised then on site testing must be done.

Technical Information

  • Anchor Body Material

    Polyamide 6

  • Pin Material

    Galvanised steel

  • Hammer or Screw Set


  • Minimum Embedment Depth

    30 mm

  • Drill Hole Diameter

    6 mm

  • Lengths

    • For items up to 15mm thick

      6 15/45

    • For items up to 35mm thick

      6 35/65

  • Qunatity per box


Related Products

  • The TS Rail system is extensively used on lightweight framed structures of either metal or timber and consists of a pre-engineered insulation board that...
  • Surface mounted stop beads provide a clean edge of render when butting up to window or door frames, or any other point of termination in the render. Made...
  • Full system stop beads are used as a vertical square edge where ever the insulated render system terminates. For thick coat render applications a PVC nose...
  • Termination bead incorporating a reinforcement mesh wing, generally used in thin coat applications. Apu beads available with removable window protection...
Contact Us

Contact Us