Oversized Washer KWL

Depending on wind loads and fixing patterns an oversized washer may be required to increase the surface area of the fastener head.

These are designed to work with our normal fixings with the fixing being inserted into the washer, there is no requirement to dismantle the fixing or change parts.

For use with KI10, TFix 8M and TFix 8S fixings only.

  • 90, 110, 140 mm

  • 200

Mechanical Fixing of Insulation to Various Substrates

Mechanical fixings or anchors play an important function in the way in which External Wall Insulation Systems perform under building and dynamic loadings. The role of the fixing is far greater than simply holding the insulation in place until the render is applied, it has to accommodate movement within the structure, positive and negative wind pressure and supporting the self-weight of the system to name a few key functions.

There are a number of different fixings that can be used and it is important to select the fixing for the application and in some instances this requires on site pull out tests to be completed to determine the performance of the fixing with the substrate.

Based on site conditions and location along with site based test results, a specific fixing pattern may be required. Please contact the Benx technical team for advice.

All masonry based EWI fixings are tested and Certified in accordance with ETAG 014 ‘Plastic Anchors for ETICS’. Within this standard there are 5 categories for which the fixings can be Certified as being acceptable to be used in and these can be seen in the table below. If a substrate is not categorised then on site testing must be done.

Technical Information

  • Washer Material

    Polypropylene

  • Washer Size

    90, 110, 140 mm

  • Quantity per box

    200

Related Products

  • For insulation boards up to 190mm thick. A polypropylene sleeve with a nylon hammer in pin, they are typically specified when fixing into masonry substrates,...
  • For insulation boards up to 270mm thick. A polypropylene sleeve with a zinc electroplated carbon steel hammer in pin incorporating a nylon head piece....
  • For insulation boards up to 310mm thick. A polypropylene sleeve with a zinc electroplated carbon steel screw incorporating a nylon head piece with a TORX...
Contact Us

Contact Us